Description

XFly X1500 Long Endurance FPV Kit – Red

De XFly X1500 is a specially developed long-endurance FPV aircraft hub For pilots seeking long flight durations and versatility. This fixed-wing FPV platform combines efficient aerodynamics with a robust construction, making it ideal for long-distance flights, FPV reconnaissance, and experimental setups.

The fuselage and wings are made of wear-resistant EPP foam, reinforced with strong 3D-printed plastic parts. Thanks to the glueless quick-assembly design the device can be used within approximately two minutes are assembled and made ready for use.

The plane has a classic fixed-wing configuration with predictable and stable flight characteristics. The high-lift wing profile provides efficient cruising speed and excellent performance during long flights. The twin-engine configuration provides a thrust-to-weight ratio of greater than 1 (without payload) and supports a payload up to approximately 1 kg.

The optimized aerodynamics, carefully aligned thrust line and balanced center of gravity allow the X1500 easily launched by hand or taken off from the groundThe bottom is provided with reinforced rubber tires, so that repeated take-offs and landings on the ground are possible without any problems.

Inside, the X1500 offers plenty of space for electronics and power supply. The spacious battery compartment is suitable for a 21700 4S2P 10.000mAh battery (not included) and allows extra room for payload. In the center of the fuselage is a separate equipment room for example a flight controller, GPS module and other avionics.

For FPV installations there are prepared mounting points on the nose and battery cover, compatible with popular systems such as DJI en WalksnailThis allows a video transmission system to be integrated quickly and easily.

De KIT version gives pilots maximum freedom to choose their own engines, controllers and electronics, so the aircraft can be fully tailored to specific FPV or long-range missions.

Most important features

• Glueless quick-assembly design for installation in approximately 2 minutes

• Twin-motor drive for powerful performance and long flight time

• Wear-resistant EPP foam and rubber tires for extra durability

• Possibility to hand launch or start from the ground

• Spacious compartments for flight controller, GPS and other avionics

• Compatible with FPV systems such as DJI and Walksnail

• Designed for long-haul flights and payload up to approx. 1 kg

Specifications

• Material: Sustainable EPP foam

• Wingspan: 1500 mm

• Height: 1050 mm

• Flyweight: about 1900 g

Required (not included):

• Servos: 5 × 9g metal gear servo

• Motors: 2 × 2212 1400KV brushless outrunner

• ESC: 2 × 40A brushless controller

• Battery: 21700 4S2P 10.000mAh

• Transmitter/receiver: minimum 6 channels

Included:

• 8×5 two-blade propellers (CW & CCW) – 1 set

✅ Note: This concerns the KIT versionElectronics such as motors, ESCs, servos, batteries, and radio system are not included.