HPI Flux Blur ESC - HPI100684 Dit product wordt voor €3,95 met PostNL thuis bezorgd. Afhalen? Bel voor de voorraad naar 013-7370097

HPI Flux Blur ESC - HPI100684

Model: HPI100684

Fabrikant: HPI

Dit artikel kun je tijdelijk niet bestellen!

Betaal veilig met iDEAL, PayPal of bank overschrijving.


The Flux Blur speedo is the most powerful brushless speed controller we could find. With the ability to handle twin 3S LiPo batteries (that's a total of 6S LiPo power!) it can deal with anything powerful brushless motors like the #100685 Tork 2200 motor can dish out!

6mm bullet connectors secure the motor wires for loss-free connection to the 12-gauge wires, and to connect to each battery pack we've attached real Dean's connectors for zero power loss and total efficiency. We figured why re-invent the wheel and release our own connector when the best is already available? Topping off the versatility of the Flux Blur speedo (literally) is an integrated cooling fan, which allows the speedo to operate at its ideal temperature.

The HPI100685 Flux Tork 2200 is the perfect motor match for the Blur speedo, and features the coolest motor cases we've ever seen, with massive machined cooling fins that really make it look the part of an all-out power plant! With a 5mm motor shaft it can fit the upcoming optional pinion gears so you can get even MORE top speed for those insane runs, or gear it down a bit for increased acceleration on the track.

You also have the ability to easily connect it to your computer for total programming control! With our HPI100573 USB Programming Kit you can connect the Blur to any Windows-based PC to control all the various facets of its power delivery, braking, throttle curves, battery cut-off and much more. You can also save various profiles to have profiles for racing, insane speed runs, stunts, fun running and more.

Add the range of optional Flux Tork pinion gears for increased tuning and even more insane acceleration!

- 100911 PINION GEAR 12 TOOTH (1M / 5mm SHAFT)
- 100912 PINION GEAR 13 TOOTH (1M / 5mm SHAFT)
- 100913 PINION GEAR 14 TOOTH (1M / 5mm SHAFT)
- 100914 PINION GEAR 15 TOOTH (1M / 5mm SHAFT)
- 100915 PINION GEAR 16 TOOTH (1M / 5mm SHAFT)
- 100916 PINION GEAR 17 TOOTH (1M / 5mm SHAFT)
- 100917 PINION GEAR 18 TOOTH (1M / 5mm SHAFT)
- 100918 PINION GEAR 19 TOOTH (1M / 5mm SHAFT)
- 100919 PINION GEAR 20 TOOTH (1M / 5mm SHAFT)
- 100920 PINION GEAR 21 TOOTH (1M / 5mm SHAFT)
- 100921 PINION GEAR 22 TOOTH (1M / 5mm SHAFT)
- 102086 PINION GEAR 23 TOOTH (1M / 5mm SHAFT)
- 102087 PINION GEAR 24 TOOTH (1M / 5mm SHAFT)
- 102088 0924 PINION GEAR 25 TOOTH (1M / 5mm SHAFT) (standard)

With the Flux Tork 2200 and Blur combo, you get all the power you can desire, with custom tuning and multiple battery handling thrown in for fun! You can get your friends saying 'what the Flux?!' as fast as you can pull the trigger! You'll have to experience it to believe it!

Motor and Battery Combinations
The Flux Tork Brushless Motors requires very powerful batteries to get the most out of them - please make sure that you use the right combination! HPI highly recommend the use of LiPo batteries above 4000mAh and 20C. Using batteries with lower ratings, or the use of lower quality LiPo batteries, may cause damage to battery and/or speed control. Using batteries below the specified ratings may void the warranty of the speed controller and/or batteries.

The term Kv refers to the number of RPMs that the motors will try to deliver per volt applied, and is a standard term for brushless motor power.


Schrijf een review!

Er zijn geen reviews geschreven. Schrijf als eerste een review. U moet wel eerst inloggen.

Schrijf een review

Laatste nieuws

Kom langs in Oisterwijk!

  • Toemen XXL Superstore

    Dorpsstraat 17
    5061HH Oisterwijk

Gebruik van deze site betekent dat u onze algemene voorwaarden accepteert.
Toemen Modelsport | Algemene voorwaarden | Privacy verklaring | Disclaimer


Ontwikkeling en Optimalisatie door